SPT Release Notes

Bugfixes:

• General: Roof height is transferred as reference height again (concerns Ireland).
• General: Reduction of snow load in Germany fixed.
• Pitched roof: Display of TT fasteners.
• Pitched roof: Flex connector display.
• Various bug fixes in all systems.

Changes:

• Flat roof: Dimensioning Connected module fields in CAD plan automatically.

Features:

• Pitched roof: RHM roof hooks available.

Bugfixes:

• General: Roof pitch is transferred from form of room to draw.
• Flat roof: Correction of projected area for walkways.
• Flat roof: (previous) statics report stone display readable.
• Various bug fixes in all systems.

Changes:

• Pitched roof: Update of the information page.
• Flat roof: Optimized error message for overload.
• Solrif: New end skirt is activated.

Bugfixes:

• General: Roof area change with double click.
• Solrif: Module bracket utilisation in top row.
• Various other bug fixes in all systems.

Features:

• Solrif: new eaves profile activated (since October 1st).

Bugfixes:

• MSP-FR: Paraptet dimensions are no longer reset after saving.
• MSP-FR: Copy and place multiple modules adjusted.
• Various other bugfixes in all systems.

Changes:

• MSP-FR: South ballast distribution improved.
• MSP-PR: Various optimizations in the layout.

Bugfixes:

• General: Decimal separator -> “.” is also accepted.
• MSP-PR: Note overload components even with low overload.
• MSP-FR: Various docking problems.
• Various other bug fixes in all systems.

Changes:

• MSP-FR: Default values for roof pitch (3°) and parapet (300 mm height).

Bugfixes:

• MSP-FR: User-defined edge distances can be set again.
• MSP-FR: Deactivate magnet functionality: no unwanted docking.
• MSP-FR: View statics pdf printout corrected.
• MSP-FR/MSP-PR: Various corrections and completions in the calculation of THG values.
• Solrif: Various bug fixes and optimizations.

Changes:

• MSP-PR-CH: The new, reinforced MSP-PR-CH support profiles in heights of 50 and 70 mm can now be planned in SPT.

Bugfixes:

• General: Shape coefficient snow load for large roofs correct again.
• General: “Manual” tab for “Output” works correctly again.
• MSP-FR: Extraction of earthing screws with conductive center terminal option fixed.
• Solrif: Various bugs fixed.

Changes:

• MSP-FR: The load distribution with central support is calculated more realistically.
• MSP-FR: Further optimisation of the distribution of the ballast beams.
• MSP-FR: New design for module change.
• MSP-PR: Error message in case of overload now appears from 100% utilization.
• MSP-PR: Schematic image for the laying system changes immediately when the system is changed.

Bugfixes:

• MSP-FR: Docking between PV modules works again. In case of previous errors, the design must be saved again and then the modules can be docked again.
• MSP-FR: The PDF output in CAD plan and structural analysis is now complete again.

Features:

• MSP-FR: Input of friction coefficient 0 is no longer possible.

Bugfixes:

• Solrif: Edge profiles are drawn correctly.
• MSP: Various language errors in foreign languages fixed.
• All: eHora connection.

Changes:

• MSP-FR: Optimizations in the ballast distribution.

Bugfixes:

– MSP-PR: Standing seam roof: Error in material selection fixed.

Changes:

MSP-PR: From Tuesday, 09.04.2024, an additional support channel with a length of 3.55 m will be added to the currently available MSP-PR-CH support profiles =>  Both lengths (3.30 m and 3.55 m) can be planned. The supply principle changes from stock-led to demand-oriented. The delivery period for the 3.30 m beam profiles is now 4-6 weeks.

MSP-PR: From Tuesday, 09.04.2024, the following 3.30 m long inlay profiles MSP-PR-IC(B) will be replaced by a new inlay profile with 3.55 m => The 3.30 m long inlay profile is no longer plannable.

• Inlay profile MSP-PR-IC 30
• Inlay profile MSP-PR-ICB 30
• Inlay profile MSP-PR-IC 35
• Inlay profile MSP-PR-ICB 35
• Inlay profile MSP-PR-IC 40
• Inlay profile MSP-PR-ICB 40

Features:

• MSP-FR: Explanation “Max. foot pressure” in results table.
• MSP-FR: Show border area also with “Show background”.

Bugfixes:

• MSP-FR: Fixed over ballasting of individual blocks on large roofs.
• MSP-FR: Load-bearing capacities of center clamps increased in accordance with general building authority approval.
• Solrif: Option “ground connector” has been activated again.

Changes:

• MSP-FR: Clear display of cp values.
• MSP-PR: Reset of snow load when changing the roof pitch. When saving, the “Snow load” field is highlighted in red and the following comment is displayed “Snow load [kN/m²]* (si=μi*sk) is mandatory!”.
• MSP-PR/FR: Reset the wind load when changing the building height. When saving, the “Wind load” field is highlighted in red and the following comment is displayed “Wind load [kN/m²]* (qp, peak velocity pressure) is mandatory!”.

Features:

• MSP-PR: Optimizations in the design of the roof hooks.
• MSP-FR: “Generate ballasting plans separately” information text improved for large roofs.
• MSP-FR-G: Maximum permissible number of stones on the connecting rails reduced.
• Solrif: Minimum size of blind modules adjusted.

Bugfixes:

• MSP-FR: Reference height for wind load: Error in unit corrected.
• MSP-FR: Restrictions for second ballast tray corrected.
• MSP-FR: Corrected translation error in the “Construction” menu.

Changes:

Long wind deflector (MSP-FR-S)

1. Module length range south is adjusted to 1620-2399 mm.
2. The new long wind deflectors (length from 1815 mm to 2399 mm) are now automatically designed in the SPT.
3. Additional information can be found in the technical data sheet.